- Steel body
- Steel and Nylon Nose
- Standard End Force
- Add “P” to end of part number for optional nylon patch. Do not use the nylon patch if threading into soft material such as aluminum.
- Add “PT” for nylon pellet.
Steel Nose P/N | Nylon Nose P/N | Thread (A) | Body Length (B) | Nose Length (C) | Nose Dia (D) | Start – End Force (lbs) |
---|---|---|---|---|---|---|
SW10-1XFS-G | SWN10-1XFS-G | 6-32 | 0.375 | 0.0625 | 0.046 | 0.5 – 3.5 |
SW10-2FS-G | SWN10-2FS-G | 8-32 | 0.500 | 0.093 | 0.070 | 0.5 – 4 |
SW10-3FS-G | SWN10-3FS-G | 10-32 | 0.562 | 0.125 | 0.093 | 0.5 – 5 |
SW10-4XFS-G | SWN10-4XFS-G | 1/4-20 | 0625 | 0.187 | 0.119 | 0.5 – 6 |
SW10-4FS-G | SWN10-4FS-G | 1/4-20 | 1 | 0.187 | 0.119 | 3 – 13 |
SW10-5FS-G | SWN10-5FS-G | 5/16-18 | 0.625 | 0.187 | 0.135 | 0.5 – 10 |
SW10-6FS-G | SWN10-6FS-G | 3/8-16 | 0.687 | 0.187 | 0.186 | 1 – 12 |
SW10-8FS-G | SWN10-8FS-G | 1/2-13 | 0.812 | 0.25 | 0.248 | 2.5 – 15 |
SW10-10FS-G | SWN10-10FS-G | 5/8-11 | 1.125 | 0.312 | 0.310 | 3.5 – 26 |